Bytecc PCIe SATA II 300 Bedienungsanleitung PDF herunterladen (Seite 8)

MN2000000143 Page8

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑ and ↓to switch the RAID level to

JBOD-Concatenate, then press Enter.

5. Please use arrow keys ↑ and ↓to switch the disk, use the

“space” key to mark the selected disk, then press Enter.

6. Input the RAID size, press Enter.

7. When asked Created RAID on the select HDD (Y/N)?, press Y

to accept.

8. At the next screen select Save And Exit Setup, press Enter.

When asked Save to disk &Exit (Y/N)?, press Y to exit the

BIOS.

RAID 0+1 (Striping + Mirroring)

1. As the BIOS boots press Ctrl+J when prompted to enter the

RAID BIOS.

2. At the next screen select Create RAID Disk Drive, press Enter.

3. Enter RAID name, press Enter.

4. Please use arrow keys ↑ and ↓to switch the RAID level to

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Keine Kommentare

Bytecc PCIe SATA II 300 Bedienungsanleitung Seite 8